Silicon Bed Springs For Creality Ender3 CR10* Set of 4
$6.95
Silicon Bed Springs For Creality Ender3 CR10 Set of 4
Description
Replace unreliable bed springs with these high temperature silicon blocks, stops the endless adjustment on these print beds and holds the level firm.
Cast from high temperature silicon they will last a long time, easy fit as the pack contains 3 x 18mm and 1 x 16mm. The 16mm goes on the corner with the cable relief to keep the bed even with the rest of the blocks.
Silicone mounts are more consistent– that is, they do not shift or settle over time or with the heat of your bed, meaning your build surface will remain consistently level without constant adjustment.
CR10 users
These silicon springs will suit some CR10 printers, check your existing front springs, if they measure around 18mm, order these, if they measure around 24mm, order our CR10 set.
Additional information
| Weight | 0.05 kg |
|---|---|
| Dimensions | 2 × 2 × 2 cm |
